Sports in Victorian England Essay Example

Sports in Victorian England Paper Sports allow people to come together and spend time with one another. Women, children and men could all participate In one sport or another. As It Is now, It was back then, a great way to spend time with each other and Just kick back and relax. Some sports that were played back then were bicycling, croquet, lawn tennis, and soccer. Bicycling was a very popular sport to participate In. It was inexpensive to start and also a great way to get around without having a car. It started In England In about 1885 hen people needed to save money. By the sasss people started calling the era the Golden Age of Cycling. When cycling first started the bikes, as we call them today were a lot different than the bikes we ride today. The front wheel was about 40- 48 Inches In diameter and the rear wheel was about 16 Inches In diameter. This supposedly gave a smoother ride. Croquet was also a sport of the Victorian era. This sport was one of the few sports that women and men could play together. Since a lot of the sports had to do with speed and strength, many of the girls werent allowed to play. We will write a custom essay sample on Sports in Victorian England specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Sports in Victorian England specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Sports in Victorian England specifically for you FOR ONLY $16.38 $13.9/page Hire Writer It was very popular around 1856 in England. Croquet started becoming very popular because women could play privately without men, and sometimes even Walt or against men. It malign nave even Eden ten TLS ever co-De game established. Women cheated often in this game by wearing long skirts and hiding their foot when they would kick the ball away from the target stick. Men had to read counseling books to learn how to deal with the girls behavior so they would not fight. Also Lawn Tennis was an awesome sport during that era. A lot of middle aged women played this game. After a while men also started playing tennis and a lot of organized competitions were started. At one point, there were so many people playing the game that it became chaotic because of the lack of organized rules, but people still had a lot of fun playing together. During the sass the game became patented, universal rules were established and money paying tournaments started. But still, there were still some inconsistent rules so it was still a mess. When All England Croquet Club was formed, a group of lawn tennis players took an entire summer to play and perfect the game. That was when the boundaries of the net and courts were set and became widely accepted. In 1877 the first serve was served and thats when the tennis we know today became the amazing sport it now is. Football is one of my favorite sports to watch and it was also a popular sport during the Victorian Era. If you compare it to todays games, it was like rugby and soccer put together. During ten Totally was more Like ten soccer AT today. It started In England In 1871 and was organized by churches to get more attendance at church. Thanks to those churches, football as become the number one most popular sport in the America today! The first rules were that the first team who scored 2 out of 3 times won the game. In university football, the players could tackle the other teams players to keep them from scoring a goal. Those rules eventually became widely accepted and developed into the game we know today. The first governing body ever was the Football Association (FAA). Women didnt get to play a lot of sports during the Victorian era. Back then werent thought of very highly. The two sports women mainly played were croquet and lawn tennis.

The Person I Admire the Most Essays

The Person I Admire the Most Essays The Person I Admire the Most Paper The Person I Admire the Most Paper The person that I admire the most Why my sister is my role model? She is not a world famous or a multimillionaire, but she is very important character in my life. I save my admiration for her because she is a special woman. I admire my sister because of her personality and for all she has done for me in my life. I grew up with my sister and she has always been my best friend. My sisters name is Ana. She is 25 years old and lives her in Miami. Ana is studying at FIU University and is working too. Looking at her, it is not difficult to see why she relates so successful. She has beautiful black hair and large round brown eyes. She also has charming smile that makes her face is radiant. She is quite tall and slim. She wears fashionable and elegant clothes that highlight her perfect figure. All the features of her appearance show how beautiful she is. She has many positive character traits. Firstly, my sister has a lot of friends, because she has a reputation as a friendly and sociable person. She is extrovert and communicative. Secondly, she is very helpful and loving. Therefore, you can always rely on her. If I am having a bad day she is always there to help make it better. That is why Ana has never failed me. At the same time, she is very determined and knows what she wants to achieve in her life. She is very ambitious and always reaches her goal. She is also a great leader, a natural born leader. Thanks to this ability she can work in a group and distribute the work among others. She enjoys when she is working with people. The above description of her personality only confirms that Ana is a wonderful person.

Blood Diamonds caused deadly conflicts, with millions killed, huge Research Paper

Blood Diamonds caused deadly conflicts, with millions killed, huge western profits, and promots child soldiers and slavery - Research Paper Example This can be attributed to a case in 2011 where Belgium mining marketing city; Antwerp was accused of continuing to buy diamonds accrued from rebel National Union for the Total Independence of Angola (UNITA) (Bieri, 2013). Nations like Canada and Great Britain have been accused as some of the beneficiaries of the unlawful UNITA diamond selling. In short, diamonds from Africa are worth so much profits, wealth that ends up in Europe, White population of South Africa, the U.S, and Israel. On the other hand, African people labor in the mines under slavery conditions for small profits and have no control over these diamonds. Some time ago, the public began to become alert that large numbers of diamonds are excavated in vehement and cruel settings.  Consumers are now calling on, with ever bigger earnestness, that their diamonds be free from killing and human rights violation. So far, however, the diamond industry’s reaction has been sadly insufficient. Diamonds with fierce histories are still being excavated and permitted to enter the diamond stream, where they become unnoticed from other stones. Abuse, human rights violation, and other prejudices remain an everyday feature of diamond mining (Mapp, 2011) In few years ago, some African countries have borne inhuman civil disagreements articulated by diamonds: the Republic of Congo, Liberia, Sierra Leone, and Angola. Diamonds build up civil wars by supporting militaries and rebellious guerrillas. These groups also combat with each other to regulate diamond-rich region. The sad outcome is killing, and shocking human rights mistreatments (rape to the use of child soldiers) (Rosen, 2012). Diamonds that promotes civil wars are often referred to as blood or conflict diamonds. Even if many diamond generated wars have now ended, blood diamonds continue to be a serious issue. Civil clashes in the DRC continue to this date. So far, the fighting in

If It's Legal, It's Ethical; and Besides, Everyone Does It Essay

If It's Legal, It's Ethical; and Besides, Everyone Does It - Essay Example Group hedge-fund, Raj Rajaratnam obtained inside information through supporting the graduation parties of several young executives in major companies such as Intel. Arthur Anderson and Credit Suisse First Boston Corporation (CSFB) shredded documents that would be crucial in pending Enron investigations. The outcomes of such behaviours were costly legal suits by the SEC, loss of investor confidence in the industry (Jennings, 2012). Other executives were sentenced for long terms in jail. There are no disadvantages competitively if companies do not engage in the same behaviours as those of the industry. Companies that behave ethically will attain higher reputation and trust from clients thus gaining a competitive edge in the market. If firms do not follow the unethical industry behaviours, they will avoid costly suits by the SEC and gain market reputation (Jennings, 2012). Some of the negative consequences for companies that adopted industry practices include costly suits by the SEC, loss of investor confidence and bankruptcy. Such companies distorted the market prices and led to decline in the market capitalization since some investors sold their stocks below the issue prices in order to avoid further losses. If everyone in the industry is behaving unethically, it will not be difficult for one to be caught. The Securities and Exchange Commission constantly monitors the transactions of each financial identity after complaints of insider trading thus facilitating the identification of criminal and unethical behaviours. On the other hand, the SEC requires the suspected individuals to voluntarily assist in the investigation in order to qualify for leniency in the exchange of the insider trading and market manipulation testimony (Jennings,

A review of at least one TED talk. Focusing on he critical issues of Essay

A review of at least one TED talk. Focusing on he critical issues of hoslitic sustainable design ( TED.com) - Essay Example The only way we can pay back to our ancestors the way they have looked after our needs today, is by doing the same for the future generations. Ray Anderson, who is a CEO of the company Interface, puts a stress on the abovementioned value at TED Talk thru a poem entitled â€Å"Tomorrow’s Child.† He also proposed a revised Environmental Impact Equation as a business model. From Paul and Anne Erhlich’s model of â€Å"environmental impact is equal to the product of population, affluence, and technology, mathematically explained as I = P x A x T,†3 he suggested, the New Civilization Environmental Impact Equation of â€Å"impact is equal to the product of population times affluence; affluence being an end in itself turned into a means to an end, all over the technology of the future times the happiness, where happiness becomes the end; happiness with less stuff, as I = P x a / T2 x H.†4 Anderson’s proposition was not only his theory bound to be proven, but a theory already proven thru the initiatives of his company; that it is a business model for sustainability that can be done. If Inte rface has done it, Portland can do it as well. Portland has been a place involved in the quarrying business. Exporting Portland limestone can be traced back to 1300AD for domestic and public use and continues to up to this day.5 Using Anderson’s business model, Portland can minimize its environmental impact on quarrying limestone if companies will reuse limestone, and find other means of producing limestone without abusing our environment. Residents of Portland can also start by using fewer products, particularly products that need limestone to manufacture. Portland can start by starting a simple lifestyle. People’s needs are basic, and sustainability is something basic. Sustainability is necessary for everyone in this world, for people in the present and for people in the future. And as Anderson said, â€Å"If something exists, it must be possible, and if

The Bamboo And Construction With Bamboo Biology Essay

The Bamboo And Construction With Bamboo Biology Essay The world is at the jaws of crisis in many sectors in the near future. One of the most important of them is the availability of timber. World is becoming more and more urbanized. There must be some sort of solution which can give some relief to the hunger towards the need of timber. We need to look for a solution which must have few characteristics such as A product which can substitute wood in the widest range of purposes of uses.. A product which doesnt have negative environmental impact or is eco-friendly.. A product which can be made in a rural environment to assist in reducing the pressure of urbanization in the current world. A product whose production scale must be such that it shouldnt displace the rural people from its reach. A product which is very much meaningful in the activity. Bamboo is definitely one such solution we got for the near future. Bamboo products can substitute wood-based products in a very wide range. The cultivation and maintenance of bamboo is very easy in comparison with wood. Bamboo can be grown as clumps in most soils and is very cheaper which makes it a feasible material for poor people and in rural regions. More and more people can be involved in this process to make them aware of the possibilities with bamboo. Bamboo based industries must be encouraged by maximum villager involvement as it even requires very low capital. Bamboo based industries can therefore provide the time and space for evolutionary development of the rural economy. 1.2 THE PROBLEMS (1) The world produces 3.5 billion tons of wood from roughly 3.5 billion hectares of forest. Approximately half of that is used as firewood. In the developed world, less than one billion people consume an average of approximately 1 ton per capita per year, hardly any of it as firewood. The richer the country, the higher this amount (in the USA it is 2.3 tonnes). Thus, in the poorer parts of the world, people consume far more firewood than industrial wood (by a factor of at least three to one). The overall objective of world development is that standards of living should rise. At the present, Chinas annual per capita wood consumption is only 0.16 m3 much lower than the global average of 0.65 cubic meters (China Daily, 13 April 2000). Will the developing world start to consume wood in a manner similar to the developed world as it becomes richer. The evidence is not clear but South Korea has seen a quadrupling of its per capita consumption between 1950 and 1990. Although Chinas per cap ita lumber consumption remains much lower than the global average, its demand for lumber has increased drastically over the last few years, while its supply has remained steady or decreased slightly (China Daily, 13 April 2000). Will new technology (email and Internet) reduce the amount of paper used? Again the evidence is not clear but there seems to be no strong trend as yet. The consequences for world wood consumption are therefore very serious if rising standards of living lead to an accelerated usage of wood products [10]. If the world population (six billion now trending towards eight billion in 25 years time) moved to consume wood in a pattern similar to the more developed countries (e.g. 1 m3 / capita in Germany [11]) the consumption of industrial wood (excluding firewood) would need to at least quadruple (as it did in South Korea). It is unlikely that the wood currently consumed as firewood could assist much, for well-known technical reasons (it is often dead wood, small si zed and sparsely distributed). (2) The area of forest is being reduced by continuing deforestation. This is compounded by a growing consciousness that forests have values over and above their timber value (for carbon retention mature forests may not actually sequester extra carbon-for biodiversity shelter and for soil, water and air quality values). Thus the supply of timber-producing forest is decreasing, through preservation, in such diverse economies as the USA, Australia, New Zealand, India and China. (3) In the last two centuries, improving standards of living have been preceded by large increases in population and increasing urbanization. It is paradoxical that the population appears to increase rapidly before gains in living standards appear and that steeply rising population can threaten to cancel out those gains. Developing countries are following along the pattern first established in Britain 250 years ago but with some differences. The English population rose from 6 million in 1750 to 40 million in 1900 but would have increased to over 60 million were it not for the huge outward migration to the US, Australia, New Zealand and South Africa. Even with that safety valve, small villages like Birmingham increased from populations of only 4000 in 1680 to 400 000 in 1881, as people left the countryside for the towns. They had little choice. There was not enough free land in the countryside for farming. Living conditions for most of the population in these cities were very poor and their working conditions dehumanized. Todays developing countries do not have the possibilities of overseas migration; they face the same pressures towards urbanization but do not wish to reinvent the dark satanic mills of the 18th and 19th century. It would be good if sufficient employment could be found in a rural environment to reduce the pressure towards urbanization. (4) Studies in both the developed economies and the developing economies have come to the conclusion that people work best in small to medium size firms/enterprises where they can see the impact of their own efforts and where they feel that they can have an effect on decision-making. These conclusions find their expression in the general concept of participation. -IAN R.HUNTER, 2002, Bamboo and Rattan, Vol. 1, No.2, pp.101-103, Available at: www.vsppub.com Its not like bamboo can be the only solution for all these issues outlined above but experiences in few places indicate that bamboo can make some meaningful contribution. 2.1Bamboo as a wood substitute The bamboo culm, reduced to its finest parts, is an excellent industrial fiber. As such it has been shown, both in the laboratory and in practice, to be an excellent substitute for wood fiber in such things as paper, medium density fiber board and veneer. There are very few technical difficulties in utilizing normal wood-working machinery to work with bamboo. One difference that does need to be accommodated is the higher silica content of bamboo which can dull cutting edges. With good physical and mechanical properties, low shrinkage and average density of 0.7 g/cm3, bamboo is well suited to replace wood in several applications, especially in panel form. Bamboo mat board and bamboo strip board have been exploited on an industrial scale, and products marketed for various end uses such as flooring, roofing, and other housing components, furniture, packing cases, etc. At present, in China, over 1,000,000 m3 of panels of various types are produced annually in some 200 mills, whereas in India, industrial-scale production of panels is confined to bamboo mat board with about 2000 m3 board by seven mills. The global use of paper is reported to be increased by 5% annually. Today, Asia, and mainly India and China, make the most use of bamboo for pulp and paper. India uses about 3 million tons of bamboo per year in pulp manufacture and China about 1 million tons, and both are set to increase their use of bamboo for paper pulp manufacture (China targets 5 million tons per year). Bamboo pulp is also processed into incense paper in the Philippines for export. Brazil is presently the only American country that uses bamboo for making cellulose and paper. However, bamboo has certain characteristics that are superior. It has a high surface hardness such that laminated bamboo flooring is equal in wear to the hardest American hardwoods. Many of the products made from bamboo can be and are made in small factories with very limited capital requirements; hence these factories can be distributed around the country-side close to their raw material. Bamboo also has a unique role to play in constructing strong light-weight houses. It has been known for a long time that light weight timber frame construction houses offer the greatest safety against earthquakes and also greater safety on earth slips. Lightweight timber framing housing is the norm in New Zealand. In 1987, the small town of Edgecombe in the northern part of the North Island of New Zealand was shattered by force 7 earthquakes. The force of the earthquake was sufficient to tip a railway engine on its side. Yet no-one was killed and all of the houses remained standing. There are two technologies utilizing bamboo that can be adapted to provide similar kinds of houses. In one, bamboo poles can be used in a similar way to timber studs to provide a similar space-frame construction. Work needs to be done improving the joins before the result is as strong as a timber frame house. In the other, a bamboo frame or hurdle can be woven out of split bamboo and plastered on either s ide. The bamboo hurdle effectively reinforces the concrete plastering. This second style of building produces a result which is more culturally familiar in many countries and possibly therefore more acceptable. 2.2 Properties of Bamboo: 2.2.1 Tensile strength: The bamboo fibers run axially. outer zone constitute of highly elastic vascular bundles, which have a high tensile strength. The tensile strength of these fibers is higher than that of steel, but to construct connects which can transfer load axially is merely impossible. 2.2.2 Shrinking: Bamboos shrinks a lot more tan wood when it loses whole of its water. Nodes are very vulnerable during this shrinking. Bamboo shrinks in the cross section 10 to 15% 2.2.3 Fire resistance: Due to the presence of the high content of silicate acid it offers a very good resistance towards fire.. Filled up with water, it can stand a temperature of 400 ° C while the water cooks inside. 2.2.4 Elasticity: Bamboos enormous elasticity makes it a very good building material in earthquake prone zones. Its is very light in weight and can be easily worked on. -Bamboo as a building material, 2002, available @ www.bambusnewengreportsbuildingmaterialbuildingmaterial.html 2.3 Bamboo for construction: There is a substantial role of bamboo in the construction field as it grows naturally, it has strength, flexibility and versatility and is very suitable material in every part of a house when treated and is used properly. Not only there are technical advantages with bamboo but it is very economical as it is a local product in many places of the country and is amongst the cheapest materials available. Recently there are hikes in the prices of bamboo but with proper cultivation and increased production these inflations in the fields of bamboo can be handled. Cultivating of bamboo properly gives high yields. Moreover bamboo can replace usage of timber in many areas. It can contribute towards the solution for the deforestation which is a very major concern in the world. 2.3.1 Roofing: Bamboo shingles whose lengths are almost as long as rafters. The bamboo canes are first halved along their diaphragms and are bisected. Then they are threaded as alternative facing units and are tied. They are held in the supports by their own weight. 2.3.2 Trusses Fabrication of roof trusses is about the most promising use of bamboos. Literally, any span of truss is possible, and as indicated in Section 5, a Fink truss of about 8.5m span can be carried by three workmen and installed by about 5 workmen. The property of lightweight with strength and stiffness is manifested here. Also, substantial savings in the non-use of heavy lifting equipment. (ii) Scaffolding (iii) Disaster Mitigation The lightness of bamboo, wide availability and possibility of building shelter from modular units lends it for use for post-disaster shelter. A project is in the offing by the UNHCR where temporary shelters are fabricated from A-shaped bamboo support frames with horizontal members at the apex and at mid-heights of the A-frame. A water-proof sheet is draped over this frame for cover. 2.3.3 Bridges Bridges attempted consist of: (a) Footbridges: Simple cross-braced frames with the walkway formed at the crutch. Culms of 50-75mm diameter are bound by bamboo lashings. They are suited to rivers with muddy or sandy bottoms where the height above bed does not exceed 5m. A typical crossing might be 20m long. (b) Handcart Bridge: The construction is more elaborate with abutments and pilings. The abutments are formed from pairs of culms staked to the ground. A pair of horizontal culms forms the pile cap and diagonal braces stabilize the assembly. To form the roadway, three longitudinal bamboo beams of 100mm Ø are lashed to the caps and tied together at the center of each bay with a cross-member. 22.3.4 Scaffoldings Bamboo can be used for the construction of safe scaffoldings for very tall buildings because of the favorable relationship between the load-bearing capacity and weight. Bamboo has been used for centuries as scaffolding in Asian countries and, despite competition with many metal scaffolding systems, remains one of the most preferred system in both China and Hong Kong (Fu, 1993). Owing to its high adaptability and low construction cost, it can be constructed to any layout to follow various irregular architectural features of a building within a relatively short period of time (Chung, et al., 2003). They are used in construction sites to provide temporary access, working platforms for construction workers and supervisory staff, and to prevent construction debris from falling on passers-by. In Hong Kong, they are used as Single Layered Bamboo Scaffolds (SLBS) for light work and Double Layered Bamboo Scaffords (DLBS) for heavy work (Chung and Sin, 2002). Bamboo scaffolding, like any other, must possess integrity and must be laterally stable. The foregoing is ensured by the provision of bracing. The bracing is by two pieces of bamboo fixed in an X shape and at an angle of 60o-70o over the section of bamboo to be braced. For multi-storey structures it is required to tie the scaffolding to the building often through 6mm dia mild steel bars (putlogs) pre-fixed to concrete at every floor. A prop is also required between the building and the scaffolding to prevent the leaning of the scaffolding towards the building. The canes are not treated even at their connections and only lashed joints are used. The cane extension is carried out by lashing the cane ends together by using several ties. The ties are arranged in such that force acting vertically downwards wedges the nodes in the lashing. By tightening the ropes between the canes the friction can be increased to the maximum. The vertical and horizontal canes used for scaffolding are joined using soft lashing. This technique has a great advantage that the joints can be tensioned to the right degree without difficulty and even released quickly. -Dunkelberg, Klaus: Bamboo as a building material, in: IL31 Bambus, Karl Krà ¤mer Verlag Stuttgart 1992. 3.1 Mechanical and Structural Properties Bamboo, being a circular, hollow structure has certain mechanical and structural advantages and disadvantages as compared to a rectangular solid timber of the same cross-section. These advantages/disadvantages are, in other instances, complemented or accentuated by the cellulose fiber make-up of the bamboo. These comparative analyses are tabulated in Table 1.0. Some rules of thumb for the relationship between the mass per volume of bamboo and some mechanical properties have been derived by INBAR and Janseen (1991). These are given in Table 2.0. Also, various tests for strength and mechanical properties and design rules have been put forward by INBAR (ISO-22156, 22157, ISO/DTR-23157.2). Comparative Mechanical Properties of Bamboo and Rectangular Lumber (Janssen, 2001) Table 1.0: Comparative Mechanical Properties of Bamboo and Rectangular Lumber (Janssen, 2001) Property Bamboo Rectangular Lumber Assumptions 1. Moment of Inertia, I I = 0.40A2 I = 0.16A2 à ¢Ã¢â€š ¬Ã‚ ¢ For most bamboos, d = internal diameter = 0.82D à ¢Ã¢â€š ¬Ã‚ ¢ For timber, mostly h = 2 x b 2. Optimum Material Use, EI 4900A2 2240A2 à ¢Ã¢â€š ¬Ã‚ ¢ Cellulose = 70,000N/mm2 à ¢Ã¢â€š ¬Ã‚ ¢ E fiber = 35,000N/mm2 à ¢Ã¢â€š ¬Ã‚ ¢ 50% of cross- section of fiber is cellulose. à ¢Ã¢â€š ¬Ã‚ ¢ Eà ¢Ã¢â‚¬ °Ã‹â€ 350x% of fibers. à ¢Ã¢â€š ¬Ã‚ ¢ In bamboos, fiber is 60% on outside and 10% on inside, hence E outside = 35060 = 21,000N/mm2 and E inside = 35010 = 3500N/mm2 à ¢Ã¢â€š ¬Ã‚ ¢ Edahoma = 14,000N/mm2 Bending à ¢Ã¢â€š ¬Ã‚ ¢ Compression stress during bending may result in transverse strain in fibers of top face of culm. Lignin in fibres is weak in strain. Coherence in cross- section is lost and EI drops dramatically. à ¢Ã¢â€š ¬Ã‚ ¢ If load removed culm returns to original straight form. à ¢Ã¢â€š ¬Ã‚ ¢ Timber will not regain original length when load is removed. à ¢Ã¢â€š ¬Ã‚ ¢ Poisson coefficient for bamboo = 0.3. 4. Shear à ¢Ã¢â€š ¬Ã‚ ¢ Shear in neutral layer = 1.3x shear for timber à ¢Ã¢â€š ¬Ã‚ ¢ Smaller thickness to resist shear. à ¢Ã¢â€š ¬Ã‚ ¢ Larger forces on bolt fasteners at joints. à ¢Ã¢â€š ¬Ã‚ ¢ Advantage of not having a ray structure is nullified by hollow nature. à ¢Ã¢â€š ¬Ã‚ ¢ Larger thickness to resist shear. à ¢Ã¢â€š ¬Ã‚ ¢ Has rays. Rays are mechanically weak. Hence, timber material is weaker in shear than bamboo material. 5. Torsion à ¢Ã¢â€š ¬Ã‚ ¢ Better torsional resistance due to circular shape. à ¢Ã¢â€š ¬Ã‚ ¢ Poorer torsional resistance because of sharp corners. Table 1.0 (Contd) Property Bamboo Rectangular Lumber Assumptions 6. Wind Resistance à ¢Ã¢â€š ¬Ã‚ ¢ Bending stress due to wind is constant over height of culm. à ¢Ã¢â€š ¬Ã‚ ¢ At top (near skin) vessels decrease and cellulose replaces vessels, leading to increase resistance to bending stress. 7. 8. Compression Density à ¢Ã¢â€š ¬Ã‚ ¢ Because of hollow nature and thus greater distance of solid mass from center, longitudinal shortening is greater and thus greater the likelihood of lateral strain in lignin. à ¢Ã¢â€š ¬Ã‚ ¢ Friction due to clamping at top and bottom of culm reduces lateral strain. à ¢Ã¢â€š ¬Ã‚ ¢ Amount of lignin deter- mines compressive strength not cellulose. 700 800kg/m3 à ¢Ã¢â€š ¬Ã‚ ¢ Solid nature makes for better compression resistance and reduced lateral strain. 850kg/m3 Table 2.0: Rules of Thumb Factors for Mechanical Properties of Bamboo Air-dry bamboo Bending Compression Shear E 0.14 0.094 0.021 24 Green bamboo 0.11 0.075 Ultimate stress (N/mm2) = Factor x mass/volume (in kg/m3) 1 Allowable stress à ¢Ã¢â‚¬ °Ã‹â€  7 x Ultimate stress JANSSEN, J.J.A., 2000. Designing and Building with Bamboo. INBAR Technical Report No.20, page no. 18-23 3.2 Earthquake Resistance Bamboo, being lightweight and hollow, makes it naturally highly resistant to earthquake (because it has high stiffness in relation to its weight). That, it does not shatter at failure means that when the earthquake is over the building can be left standing with relatively minor damage; providing shelter whiles the damage is being repaired. In a 7.5 magnitude earthquake in April, 1961, in Costa Rica, 20 bamboo houses were left standing near the epicenter (Janssen, 2000). 4.1 Problems related to Bamboo. 4.1.1 Structure The available bamboo tends not to be very straight, have variable diameters, culm thickness and show marked tapering. These attributes have a costly effect on preliminary attempts at construction in bamboo, as will be indicated later. 4.1.2 Insect and Fungi Attack More than anything else, the problem with bamboo is pest and fungi attack. Insect attack is through the relatively softer tissues in the inside wall of the cavity wall and at the budding points in the nodes. Fungi attack is severe when the bamboo is exposed to damp conditions. Various methods exist for prevention of these attacks (Jayanetti and Follet, 1998). They range from the sophisticated modified Boucherie process, through immersion in a boric acid/borax mixture in water, injection and painting with creosote, to hanging in a flowing stream immediately after harvesting for at least a week for the sugary ingredients to be washed out. Traditional preservation methods also exist such as curing, smoking and lime-washing. The real effects of such traditional methods are not known since they have not been documented and quantified. 4.1.3 Fire risk 4.1.4 No standardisation possible: no 2 culms are alike 4.1.5Maintenance 4.1.6Difficulty of making the junctions of the culms 4.1.7 No construction skills with bamboo culms in non-bamboo available countries 4.2 Measures to be taken 4.2.1Treatment of the surface For small parts this information about bleaching and dyeing are determined for kite-constructions. though it can ´t support enough weight. Bleaching and dyeing possibly can change the structure of the bamboo that far, nevertheless these methods should be introduced. 4.2.2 Bleaching: For removing traces of resin or wax bleaching in hydrogen peroxide can be done. The bamboo will get perished if it stays long. 4.2.3 Dyeing: There are different traditional styles of bleaching in different countries. In principle: 1. The color can ´t penetrate into the bamboo if at all the wax is removed. 2. The color will become more regular if it is bleached before dying. 3. Fix the color in a solution of vinegar after dying. 4.2.4 Other methods: In Japan, the surface will be peeled off, hydrochloride acid is put on the bamboo and the canes are put in an oven. The canes get a brown color. treating the canes with copper sulfate will give a green color to the bamboo and protects it from mold. These methods only dye the surface of the bamboo. To get a through and through dyeing, the bamboo can be carbonized. The bamboo is put into a boiler and is incubated with a pressure of 5 kg/cm ³ and a temperature of 150 ° C for 20-30 min. After that, the bamboo will be brown through and through. -K. A. Solomon-Ayeh,USE OF BAMBOO FOR BUILDINGS, Building and Road Research Institute (BRRI), page no 5-7

Genetic Engineering Essay -- science

Genetic Engineering Two years ago, genetically engineered bacteria, which unexpectently killed beneficial soil fungi, escaped into sewers through human error and have become toxic to plants and survived when expected not to.3 These are the sorts of consequences that come with playing God. DNA (deoxyribonucleic acid) - the chemical compound that makes up the genes and determines the type of proteins a cell can make - is the core of genetic engineering. It can be manipulated in ways we could never dream of such as a new species of a catwoman or fishman. There are so many questions that each person must ask each other before making any sort of decision that would effect the future of genetic engineering towards humans. The risks of DNA combinations can be enormous and unexpected such as the formation of bacteria resistant to antibiotics, linkage of DNA molecules with tumour-causing viruses and the introduction of toxin-formation or antibiotic resistant genes.1 Thus all risks must be taken into consideration. Genetic engineering has already been demonstrated in cattle and studies have shown linkage of DNA molecules with ulcers, cancer and heart disease.1 Unfortunately, regulation of biochemical research ethics has been erratic and half-hearted for years. The United States allowed its only national bioethics commission to expire in 1989. 2 As for in-vitro research, the Reagan Administration cancelled federal funding a decade ago. 2 So work in this area has been priv...

Summary and Critique of George F. Will’s View on Inaugural Addresses

Wade Vierheller Professor Combs English 300 27 September 2012 ‘Let Us’†¦? No, Give it a Rest Summary and Critique George F. Will is a Pulitzer-Prize writer and an editor for Newsweek. He is well-known for his strong conservative political commentary. He discusses the history of Inaugural Addresses and how they reflect the way the country has changed throughout the years. He points out a number of differences such as sentence structure, tone, and topics. For example, he cites the numbering of words.He mentions George Washington’s second sentence of his address, which was 87 words. On the one hand, I was summoned by my country, whose voice I can never hear but with veneration and love, from a retreat which I had chosen with the fondest predilection, and, in my flattering hopes, with an immutable decision, as the asylum of my declining years–a retreat which was rendered every day more necessary as well as more dear to me by the addition of habit to inclin ation, and of frequent interruptions in my health to the gradual waste committed on it by time.Back then, the culture was much different, as most people learned to read were through difficult literature such as Pilgrim’s Progress and the King James Bible. Herbert Stein, â€Å"who for 60 years was an economist and connoisseur of American’s political culture,† discovered that the average number of words per sentence for Inaugural Addresses has steadily decreased: â€Å"from Washington through Buchanan the average number of words per sentence was 44; from Lincoln through Wilson, 34; since Wilson, 25. † Will believes that â€Å"the general shortening of sentences reflects, in part, a change in nature of Inaugural Addresses. He refers to Teddy Roosevelt who called the presidency â€Å"a bully pulpit. † Later addresses have had an incentive to tell Americans how to behave with phrases such as â€Å"The only thing we have to fear†¦Ã¢â‚¬  and †Å"Ask not†¦Ã¢â‚¬  A more popular phrase which was used by Kennedy and Nixon was â€Å"Let us†¦,† which according to Will means, â€Å"For Pete’s sake, pull up your socks and shape up. † The content of the Inaugural Addresses has also changed. George Washington had to be much more modest, speaking about his personal problems and as much as he would like to rest, his country was calling him.In the beginning with Washington, the issue was that he would be able to turn the presidency into another monarchy. Around the time of Cleveland and Garfield, a major issue was polygamy. During the time of Monroe, the issue was coastal fortifications. As of today, these are no longer on the list of major issues. This progression shows how the country has grown over the many years. Though Will is happy that we do not have to talk about the issues of the past anymore, he does not like the shortening of sentences and how Presidents have become more like preachers.He sho ws appreciation of Washington’s modesty despite the amount of praise he was showered with, but understands how there were different problems during that time. Most of what Will says is backed up with some strong points, using factual information from past people such as Cleveland, Garfield, and Teddy Roosevelt. This greatly backs up his claims, making them hard to argue against. He makes strong arguments that clearly show how there has been quite a change throughout the history of the Inaugural Addresses. A significant point he brings up is the decrease in the word count per sentence over the years.It’s true there has been a major change in literature over the years. Personally, I had some trouble keeping up with the incredibly long sentence made by George Washington. It’s interesting how he partly blames it for the â€Å"change in the nature of Inaugural Addresses. † I’m not sure if I see much connection between the two. Also, though shorter sente nces shows our reading mental muscles are weaker than our ancestors’, but this does not seem to have any major negative effect on society, unless Will’s statement about the changing in Inaugural Addresses in coordination with shortening of sentences is true.This leads us to another point about the context of Inaugural Addresses. Looking at the parts of Washington’s address or Lincoln’s address (â€Å"Fondly do we hope, fervently do we pray, that this might scourge of war may speedily pass away†¦ With malice toward none, with charity for all†¦Ã¢â‚¬ ), they show hope and love in their speeches. When looking at later ones, they’ve become much more preach-y. For Will, this does not seem to be a good adjustment, and I have to agree with him here. At least in the beginning, it’s never been the President’s job to tell us how to behave.It is true that he is our leader, but his part in leading the country is taking care of politica l matters such as federal law and diplomatic troubles. Another very interesting matter he brings up is the drastic change in subject matter from speech to speech. With Washington, it was the fear of monarchy. For Monroe, it was coastal fortifications. For Lincoln, it was slavery. For Garfield and Cleveland, it was polygamy. Throughout the years, the severity of the nation’s problems has declined. It’s really something to be proud about. It shows that despite the other reasons Will has pointed out, this country has grown for the better.We’ll always have problems and we’ll keep working to solve them. This gives us drive and displays our strength and motivation. In his article, Will has done a good job of backing up his opinions with strong factual information. While I do not completely agree with him, I’m able to understand and respect his views. Really the only problem I have with the paper is the assumption on how the shortening of sentences  "reflects†¦ a change in the nature of Inaugural Addresses,† because I can’t understand how that exactly works.Works Cited Will, George F. â€Å"‘Let Us’†¦? No, Give it a Rest. † Newsweek 22 Jan. 2001: 64. Print. .

Strategy and international management Honda motors The WritePass Journal

Strategy and international management Honda motors Introduction Strategy and international management Honda motors IntroductionReferences:Related Introduction This essay is about the potential objective of the multinational company of entry in to the new market for expanding business and maximizing profit in new explored market, and will highlights possible insinuation of a global company in host country economy. In this essay Auto car manufacturing Company will be critically highlighted that why multinational auto manufacturing company expands business to other regions and discover new market places and what are the grounds behind that step. The chosen company for this critical essay is Honda Motors. Before discussing Honda motors foreign direct investment (FDI), its motives of investing abroad from its home country, and the home country policies regarding FDI. It is vital to provide company background first and its history. Honda is sustaining a global point of view, and is devoted in supplying products of the uppermost excellence keeping in view a reasonable price for worldwide buyer’s satisfaction. Honda Motor Company Limited is possibly best branded as an auto maker. Among the car manufacturing companies in Japan Honda is second and fifth biggest and successful car manufacturing company in the world. Today Honda is renowned for its innovation, excellence, well-built and advanced engineering which combine to get the best possible output in auto market and that is the reason why Honda has strong image among leading car manufacturing companies. Honda is a Japan based company, which has made its name in the manufacturing of cars in very short period of time. Honda Motor Company was founded by Soichiro Honda and his partner, Takeo Fujisawa (Source, www.honda.com). Innovative strength of mind is obvious in the absolute name of their business, which is  Honda  Technology Research Institute Compan y Limited. Honda is considered to be the primary producer of engines across the world in terms of the complete volume of the engines it manufactures annually. Honda endeavoured into the Japanese  car industry  after 1960 with the T360 (Source, www.honda.com). In this essay I will focus Honda Motors investment in Pakistan. Honda Atlas Cars Pakistan Limited is a mutual enterprise between Honda Japan Motors and the Atlas Group Pakistan. Honda Company was established in 1992 and combined agreement was signed in 1993. The inauguration ceremony was held on 17th of April 1993 and within a very small time of 11 months, construction and erection of machinery was completed. Honda invested in Pakistan because of numerous reasons which can be called the perfect location for investment. As per Dunning the location, owner specific and internalisation advantages are three basic fundamentals for multinational company to invest across the border. Pakistan got strategic importance because of its prominent geography. Indian Ocean on one side and very close of Persian Gulf which is very significant for trade import and export purpose. Pakistan is like a gate way for Middle East, for Central Asia to China and India. Pakistan is at number 9 with a population of 140 million, so it is clear that Pakistan has got a vast market and around 40 million hard working cheap labour. Road and rail infrastructure of Pakistan is reasonable well dev eloped and it is developing time by time. Because of its link with Persian and Arabian Sea export processing zone is working from 1980 and because of large demand three more export processing zones have started working in Sialkot, Risalpur and Saindak. Honda invested in Pakistan because Pakistani economy usually showed sensitivity and possible aptitude to convene exogenous blows and minimize risk (Source:- www.unescap.com). Pakistan got very strategic place in term of foreign direct investment (FDI) as per economic survey of Pakistan FDI is increasing from 2006-2007 from 6 billion US dollar which is almost 48% higher than last year. According to figures there are around 3.9 million auto cars on the roads of Pakistan, and the demands for vehicles individually and combined are increasing rapidly, and prominent figure is calculated of 300,000 as an annual demand. Multinational companies from Japan, Europe and Korea have invested around 1.5 billion dollars in Auto industry of Pakistan (Source:- www.unescap.com). It is the matter of fact that developed markets drench with the passage of time, keeping this point companies still want to preserve expansion. Honda keeps a strong point of expanding their business to areas which are less saturated. Most of the certain saturated markets may welcome variety from other developed economies and companies attempt to invest in those markets to capture market share. Pakis tan government has eased up the investment policy environment foreign private investment. For welcoming and encouraging foreign direct investment in export-oriented industries, an Export Processing Zone (EPZ) is set up in Karachi. The government of Pakistan has also ratify a wide set of investment incentives including credit facilities, fiscal incentives, and visa policy. Foreign controlled manufacturing companies exporting 50% or more of their production can now borrow working capital without any limit. Other foreign-controlled manufacturing companies including those not exporting and selling in the domestic market can borrow rupee loans equal to their equity without prior permission of the State Bank of Pakistan. Foreign investment in Pakistan is sheltered through the Constitution (Article 24) as well as through specific laws. Section 8 of the Protection of Economic Reforms Act 1992 provides legal cover to foreign investment in Pakistan. Honda established its unit in Pakistan due to several factors which they believe that will maximise their profit by investment abroad like abundant low cost land and natural resources, vast cheap and technical working people, increasing local market, reasonably developed infrastructure and important and critical location. As According to Dunning (2008) company invest abroad because of suitable climate, proximity to relevant markets, availability of raw materials and minerals, and availability of low cost advantages such as cheap labour. Honda invests overseas to lessen revelation to one market. This gives Honda international diversification and leads to benefits for Honda. As the global economy changes over the time and recession is affecting one area some time another economy in different region is practicing a boom, so operating in different countries instability can be less experienced by companies. According to Dunning (2008), It has to be more gainful for the company to develop its resources in overseas, rather than in domestic, locations. Honda chose site in Lahore, Honda current location in Lahore Pakistan is near to Allama Iqbal International Airport Lahore which can be easily and affordably accessed adding to this it can be easily access from motorway which connect main cities of Pakistan and nearly 90 km from Faisalabad international dry port.   Honda is enjoying economical delivery of cars with its well managed delivery set-up all over Pakistan. Pakistan government policies are very much in favour for investors of auto makers to invest in Pakistan. Honda invested huge amount of investment in Pakistani market so that to get more benefit and capturing more international reputation from the cheapest cost of production in Pakistan economy, as there is availability of cheap and skilled labour as it is fact that companies with labour intensive production processes have a larger incentive to invest overseas and thus benefit from these cost efficiencies. T his gives host country many advantages like increase in export, boost in economy and linkage with other countries. According to Lipsey (2002), FDI has a great influence on any host country economy and increases the interaction of countries and export from the host country increases as well. Customers who are interested in new models are manufactured in the local country (Japan) and as well as manufactures in Pakistan, is another, verdict weighty factor and gives a extra advantage to Honda FDI policy. Dunning (2000), said that market seeking factor is appropriate in the FDI decision making process. One of the reasons why Honda invests abroad is diversification. By diversifying, it reduces risk and by diversifying worldwide, one can reduce the risk further. International investing provides investors the opportunity to spread risks over more than one market. Due to rise in oil prices that increases transportation cost of vehicles from one country to other country so the prices of impor ted vehicles are normally are very high than the cars which are manufactured and assembled in home country. Honda is enjoying this case by establishing its manufacturing and assembling unit in host country as to maximise its markets shares and reduce risk. High import duties make imported cars prices higher and unaffordable. Market saturation and increased competition at home have lead automakers to the evident termination that future growth will occur in investing abroad where population is more and where the demand of cars is much. Honda motors have domination over its firm specific advantages and can exploit them abroad, ensuing in a higher trivial return or lower trivial cost than its opponents, and thus in more profit. This was said by Cantwell (2000), that advantage in technology might be used to increase international expansion and this can be motivating factor as well for companies. The subsistence of a particular know-how or core ability is an asset that can give rise to ec onomic rents to Honda. These rents are gathering by Honda by licensing the Firm Specific Advantages to another firm, exporting products using Specific Advantages as an input, or amendment subsidiaries abroad. Honda has its unbeaten technological power and innovation in their manufacturing and this makes it the successful car manufacturing company in the competition. There were and still there are competitors for Honda in Pakistan as some companies started well before than Honda in Pakistan, they know how the market and environment is. According to Hymer’s (1966), to compete in the overseas market foreign companies must possess some kind of advantage. Such advantage can be of many different types, but the most obvious is size and market power.  Ã‚  A business intend to build up a firm precise advantage in international market and development tends to be completed in the market because of localisation feature like trading hurdles, expensive carrying costs, company mostly adop t this criteria by investing out from its home country in their own services to a certain extent than through, let take a example of a licensing or agreements. The more insubstantial the company exact advantage is much stronger that propensity would be. To do business with intangible assets are very tricky and difficult to handle. There is some significant argument is that transnational corporation exist because information crossways boundaries can be moved much powerfully in the corporation rather than among independent industry, the reason is not of market collapse. That extracted that in common intangible asset can be taken as a demanded asset, but can rarely be separated from the company itself and it is impossible to be taken as a community good (Source, www.ousest.com). As the oil prices are increasing day by day so to afford heavy cars are getting tougher so trends towards small and local manufactured cars are increasing and that is the reason why Pak Suzuki Motors enjoys a domination in the car market with 40.2% of car market share and Honda has 14.7% of market share and trying its level best by deploying the new and advanced technology to its cars with affordable price (Source:- www.ousest.com). Honda has transferred nearly all its advanced technology to the unit working in Pakistan so that to facilitate the customers with innovation and advance technology with low prices as exporting cars from Japan to Pakistan becomes more expensive and unaffordable for buyers to grab the car of their dream and also buyers tends to buy relative cheap and locally manufactured and assembled cars so to reduce the factor of losing customers Honda makes sure that market must be in hand by investing more in host country. According to Dunning firm must have some owner ship advantages to penetrate in any country and capturing the market through that ownership advantages. Initially Honda was emphasizing on investments in countries where political situation were stable and government policies were in favour of foreign investment to reduce barriers in their investment and returns, Pakistan political matters were never been much stable but the policies and climate are always in a favour of foreign investment, Honda neglected the political factor and invested hugely in Pakistan to capture the uprising car market of Pakistan. This showed the interest of Honda as an active market seeking FDI. Economic prosperity is the main ingredient to the country’s progress and advancement. Foreign investment gives the strong base for economic development.   FDI added notably in the human resources development, capital formation, and organizational and managerial skills of the people in the country. One of the positive spillover effects was that the occurrence of foreign firm helps in enlargement infrastructure facilities, which makes it easier and profitable for local firms to crowd-in (Lemi, 2004). In developing countries like Pakistan FDI is helpful to narrow down the Saving-Investment gap. The economic benefits of FDI were extensive ranging, it unlock new opportunities of knowledge, transfer of technology, training of manpower, market networking and externalities in the host countries. The potential advantages of the FDI on the host economy are it facilitates the use and utilization of local raw materials, it bring in modern techniques of management and marketing, it eases the access to new technologies, Foreign inflows could be used for financing current account deficits, it increases the stock of human capital via on the job training. The local ventures are able to learn by watching if the economic structure is suitable (Bhagwati, 1994) also it stimulates the investment in RD (Calvo and Robles, 2003). Although there is huge positive impact of FDI on host country economy there is some negative implication that results due to FDI. Often seen that host country faces problems with FDI, government has less control over the foreign companies which are operating in the country and this results in not adopting the economic policies of the host country. Defence of the country has to face some risk due to incoming foreign investment. Foreign firms deploy its home country policies in the host country firm which sometimes are not suitable for the workers of the host country. Inflation rate increases in a considerable amount in host country. One of the main negative impacts of FDI is that the economically backward section of the host country is always inconvenienced when the stream of foreign direct investment is negatively affected (Source:- economywatch). Honda is providing advanced and innovated cars to the its customers mostly in affordable price and playing important role in the economy of the country as well. Honda investment resulted not only in maximizing their profit but resulted in opening of thousands of jobs and also pays taxes to the government. Honda successful investment and increase in profit motivated other companies to invest in Pakistan which will be again beneficial to locals and to government. But going to the depth of Honda investment, Honda is getting more than their investment but Honda is still not able to provide more employment opportunities by expanding their units to other cities in Pakistan. Although the unit is fully working in Pakistan but still car prices are not in a range of middle class community which could be in affordable price if Honda management reduces a small percentage from their profit. Highly technical staffs are still called from Japan and avoiding local technical staffs to remain where the y are, Honda must send host country technical staff to trainings abroad so that human resource of host country can go further up in the company making more opportunity for others. This will in return reduces Honda cost and will be helpful for host country human resource. References: Bhagwati, J.N. (1994), â€Å"Free trade: Old and new challenges†, Economic Journal, 104, pp.231-246. Cantwell. J. (2000). A survey of theories of international production:   the Nature of the transitional firm, London: Routledge. Dunning, J.H. (2000). â€Å"The Eclectic Paradigm as an Envelope for Economic and Business Theories of MNE Activity†, International Business Review,9, pp. 163-190. Dunning electic paradigm, information available ousest.com/internalis, accessed on 4th March 2011. Hymer, H. (1979). The Multinational Corporation: a Radical approach, New York: Press Syndicate of the University of Cambridge. Information available on www.ousest.com, website accessed on 21st April 2011. Information available on www.honda.com, website accessed on 2nd March 2011. Information available on   adb.org, website accessed on 22ndFebuary 2011 Information available on www.dawn.com, website accessed on 1st March 2011. Information available on www.honda.com.pk, website accessed on 2nd March 2011. Information available on www.economywatch.com, accessed on 5th March 2011. Investment Policy, Information available on www.sbp.gov.pk, accessed on 5th March 2011.  ·Ã‚  Information available on www.unescap.org/tid/publication/part_two2223_pak.pdf, accessed on 7th April 2011.  ·Ã‚  Information available on ousest.com/transact.html, accessed on 7th April 2011. Lemi, A. (2004).â€Å"Foreign Direct Investment, Host country productivity and export: The case of US and Japanese multinational affiliates†, Journal of Economic Development, 29. Lipsey, R. E. (2002). â€Å"Home and Host country effects of FDI†, NBER Working Paper No W92923, available on www.ssrn,com, accessed on 27thFebuary 2011. Pakistan Research Repository, information available on www.eprints.hec.gov.pk, accessed on 1st March 2011. .

Chemistry Study Tips

Chemistry Study Tips Studying chemistry can be stressful and feel overwhelming. There is no magic formula for learning chemistry, but you can develop an effective strategy for success. Whether youre in middle school, high school or college, these simple steps will get you on the right track. Basically it involves not getting behind, doing your own work, and not psyching yourself out: Dont procrastinate!Cramming does not equal learning. If you wait until the night before a test to start studying you will suffer, your grades will suffer, etc. Chemistry problems take time to work. Chemistry concepts take time to master.Dont ProcrastinateIts worth repeating! In chemistry you build from one concept onto the next. You need a solid knowledge base to progress.Try Flash CardsHey, they are used in elementary and primary school because FLASHCARDS WORK. Some of the information gets learned while making the cards and the rest can be learned during practice. You get to switch around the order in which you view topics, which is something most notebooks dont provide. Get some index cards and give it a try!Try a HighlighterUse it judiciously. The goal is not to turn your book or notes fluorescent. Most texts already have important concepts in bold typeface. Unless your teacher is very unusual, he or she will almost always mention likely test questions, answers, and concepts. High light them! Some teachers take questions from a test bank, but those who write their own are usually keeping a mental tally of concepts while teaching. Use MnemonicsWhat you are doing here is taking the first letters of words in a sequence you are trying to memorize and making a phrase from them to serve as a memory aid. Example: the sequence of the first few elements in the periodic table H, He, Li, Be, B, C, N, O, F, Ne could be (well, the one that came to my mind was actually dirty, which is easier to remember) Hi Henry, Lookin Big, Bad, Certainly Nasty, Old Friend - Not! Ok, it isnt great literature. One popular mnemonic device is for metric prefixes: Kilo- Hecto- Deca- Meter (liter, gram) deci- centi- milli- Kangaroos Hopping Down Mountains Drinking Chocolate Milk. Also, such phrases are even easier to memorize if you put them to music.  Work the ProblemsYou work through the example problem in the book or in class just fine. Great! That doesnt mean you understand how to apply the formulas when the conditions or wording changes. Its vital to work problems. I know it seems like a good idea to divide problem sets with classmates or to put down answers from the back of the book when youre short on time, but you truly need to work those problems to practice the skills you need for tests and beyond. Know Your TextDo you have a glossary? Answers to problems in the back? Self-quizzes? Appendices full of useful information? Find that out sooner rather than later. Learn your way around your text. Use the glossary. You cant communicate about a subject without learning the terminology.

Post War US Policy Essay Example | Topics and Well Written Essays - 1500 words

Post War US Policy - Essay Example The historical and political reasons for the Soviet strategy and the American Policy and the cold war played important role, influencing the whole world. Even though the relationship between United States and Soviet Union are observed in the perspective of post World War II experiences and in relation with Stalin’s expansionist policies, there are other influential factors. Soviet tried to develop Soviet Bloc of satellites in Eastern Europe and took major steps to influence the major portion of the world. Historical Evidences: Tocqeville(1966), made an observation of the relationship between these two giant nations over a century and a half past. He interprets that they were bound to play influential role in the world history. John Gaddis(1978) finds out the routes of American- Soviet relations back to two hundred years, the time of American Revolution. From that time till World war I, almost for a century, both these nations maintained cordial relationships and kept ideology separated from diplomacy. The American action of purchasing Alaska, made a major change in the cordiality between American-Russian relationship and resulted into gradual deterioration over the period of time. The activities of Soviet during World War II, including the attack on Finland, following Hitler’s attack on Soviet had given rise to new dimension to American-Soviet relations which further turned into a Cold war.

Citizen Kane Movie Review Example | Topics and Well Written Essays - 750 words

Citizen Kane - Movie Review Example But Charles is not able to adjust himself to the new group. One of the main reasons for this could be that Charles was never able to identify with Mr. Tatcher. This becomes more evident when Charles tells Mr. Tatcher and Mr. Burnsteen that he might have been a really great man if he weren't rich. When one is forced to do something outside his/her interest or values, he/she is subject to feelings of tension and stress. To handle this discomfort, one uses various coping methods. One of the main coping methods Charles was using was to act out and refuse to cope with the situation. Charles then goes on to get expelled from many prestigious colleges. His expulsion surely was not an indication that he was an inefficient person. The fact was that Charles Kane had turned into a rebel. When the parents he trusted so much give him away, it leaves Charles with a bitter feeling of betrayal. It causes him anger and he seeks revenge. He seeks revenge not just by getting expelled from colleges, but also when he has to make a choice to start his career, he refuses to take over wealthy gold mines, oil wells, shipping companies and real estate agencies. Instead he chooses to take over 'The New York Daily Inquirer', a newspaper that is on the verge of being closed. His thirst for revenge is all the more evident when he declares that he would like to win all that Mr. Tatcher hates. One of the stages in Erikson's Psychosocial Stages of Development is 'Identity v/s Role Confusion'. At this point of time, we get to see that Charles as a young adult had not been able to develop a n identity and instead was confused about the role he was playing. Time passes by and Charles' quest for love begins in a big way. Charles marries Emily Monroe Norton, niece of the US President. Charles marries for love. He also enters politics to win the love of the voters. But both, his marriage and career in politics come to an end with his extra marital affair with Susan Alexander getting revealed. What draws Charles to Susan is her innocence and simplicity. She reminds him his simple childhood. Charles later on marries Susan and bribes her in all the ways possible to win her love. But Charles fails to give Susan what she wants and even his second marriage comes to an end with Susan leaving him in his estate. At this point, another stage in Erikson's Psychosocial Stages of Development that comes to mind is 'Ego Integrity v/s Despair'. Older adults need to look back on life and feel a sense of fulfillment. Success at this stage leads to feelings of wisdom, while failure results in regret, bitterness, and despair. Charles is all by himself in the last few years of his life and has none of his loved ones by the side of his death bed. The words Charles utters just before his last breath catches the attention of the reporters, but none of them are able to understand its significance. He just says, "Rosebud". Initially, when Tatcher was at Charles' Parents' house to pick him up, Charles shoves a sled at Tatcher and pushes him away. Until then, Charles was enjoying himself in the snow with this same sled. The two words painted on the sled was 'Rosebud'. Charles leaves behind that sled in his parents' house. Tatcher gifts him a new sled for the next Christmas, but it never replaces the 'rosebud' sled in Charles' heart. In the last few